This course runs 1 night a week(mon-fri) for 5 weeks from 5pm – 9pm.
Check our calendar for the next course start date.

$1573.00 inc GST

Laptop

Notepad

Pen

Calculator

Standards Needed:

AS/NZS 3000 Electrical installations “Wiring Rules”
AS/NZS 3001 Electrical installations – Transportable structures and vehicles including their site supplies
AS/NZS 3002 Electrical installations – Shows and carnivals
AS/NZS 3004.1 Electrical installations – Marinas and boats Part 1: Marinas
AS/NZS 3004.2 Electrical installations – Marinas and boats Part 2: Boat installations
AS/NZS 3008.1.1 Electrical installations – Selection of cables
AS/NZS 3010 Electrical installations – Generating sets
AS/NZS 3012 Electrical installations – Construction and demolition sites
AS/NZS 3013 Electrical installations – Classification of the fire and mechanical performance of wiring system elements
AS/NZS 3017 Electrical installations – Verification guidelines
AS/NZS 4777.1 Grid connection of energy systems via inverters Part 1: Installation requirements
AS/NZS4777.2 Grid connection of energy systems via inverters Part 2: Inverter requirements
AS/NZS 4836 Safe working on or near low-voltage electrical installations and equipment
AS/NZS 5033 Electrical installations – Installation and safety requirements for photovoltaic (PV) arrays
AS/NZS 5139 Electrical installations – Safety of battery systems for use with power conversion equipment
Authorised Electrical Safety (General) Regulations
Electricity Safety Act 1998 – No.25 of 1998
Victorian Electricity Distributors – Service & Installation Rules 2014 (Optional, Required in the field)

Equipment:

Insulation Resistance & Continuity Tester (Kyoritsu Analogue 3132A model used by most of the trade) and spare batteries – Candidates must supply their own Insulation Resistance and Continuity tester, which shall be:

• Analogue
• No indication of PASS/FAIL
• Minimum of 250V/500V scale
• Minimum 2 x continuity scales
• True moving coil meter

• Hayco Multicheck Tester – Audible and Visual
• (2) Hayco Flat Blade Probes
• Earth reel
• Installation under test sign
• tools bag with basic hand tools (pliers, screw drivers ect)
• LV 650V rated Electrical Gloves and Goat Skin Electrical Outer Gloves

Clothing and PPE

All students are required to wear the following PPE:

• Closed shoes
• Full length natural fibre clothing (long pants and shirt)

LV gloves (including inners and outers) – Candidates shall provide (for the Safe Approach assessment only):

• insulating gloves rated to 650V and marked with the relevant Australian Standard AS2225 or IEC equivalent, and
• flame resistant outers.

• Safety glasses
• Hard hat
• Hi-visibility safety vest or long sleeve shirt.